LED RGB Marine Boat Spacer Rings for JL Audio 10″ M6 Subwoofers (Pair)

This pair of marine boat spacer rings is built specifically for JL Audio’s 10″ M6 subwoofer lineup, giving you the mounting depth needed for a flush, professional install on both sides at once. With a 10.75″ overall diameter and 9.100″ mounting hole, it’s dimensioned to match the M6-10IB series exactly, without requiring any modification to your existing cutout.

Each ring has RGB 5050 LED lighting built directly into the Starboard, so your subwoofer installation gets a finished glow that won’t peel or come loose over time. You’re getting two spacer/LED rings in this listing — the speaker itself is not included and is shown for reference only.

Key Features:

• Adds the exact depth needed for a proper flush speaker/subwoofer install
• Integrated RGB 5050 LED lighting built into the ring, not glued on
• CNC-cut from genuine King Starboard, resistant to saltwater and UV
• Sized specifically to match your JL Audio model, with no modification needed
• Speaker not included, spacer/LED ring(s) only

Gives You the Clearance You’re Missing

A shallow cutout is one of the most common installation headaches with marine audio. This ring closes that gap, giving the speaker the room it needs to sit flush and seal properly.

RGB Lighting Molded Into the Ring Itself

The RGB 5050 LEDs are built into the ring itself rather than applied after the fact, so the lighting stays put through vibration, heat, and saltwater exposure that would loosen a stuck-on strip.

Precision-Cut from Marine-Grade King Starboard

Every ring is CNC-cut from genuine King Starboard, the same marine-grade material trusted throughout the boating industry. It is not a lower-cost imitation plastic that fades or warps after a season in the sun.

Matched Precisely to Your JL Audio Speaker

This ring is dimensioned specifically for JL Audio 10″ M6 Series speakers (M6-10IB series, 10-inch), so it drops into place without trimming, filing, or modifying your existing cutout.

Choose Your Own Thickness and Edge Finish

Select your preferred thickness (1/4″, 1/2″, or 3/4″) and edge profile (straight, 1/8″ round, or 1/4″ round) at checkout, so the final ring matches both your depth needs and your installation’s finished look.

Ready to upgrade your setup? Order yours today!

Select your quantity, thickness, and edge profile above and order today, and if you don’t see the exact size or brand you need, reach out directly, since Ocean Breeze Marine Accessories custom-fabricates spacer rings for virtually any speaker brand and size.

LED RGB JL Audio 10″ Marine Subwoofer M6 Boat Speaker Spacer Rings King Starboard

Don’t have enough depth to install your speaker/subwoofer? Problem solved these spacer rings give you that extra space needed to mount your speaker/subwoofer. Not only that,but you also get RGB 5050 LED lights.

The LED lights are inserted in the spacer/speaker ring so you will never ever have to worry about them coming unglued or come off.

What your getting and how to order
You are getting (2) spacer/speaker/LED rings
You do not get any remote or power cords of any sorts
What you see is what you get other then the Speaker

SPEAKER IS FOR PICTURE PURPOSES ONLY (SPEAKER NOT INCLUDED)

Overall Diameter 10.75 in / 273 mm
Bolt Hole Circle Diameter  9.70 in / 247 mm
Mounting Hole Diameter  9.100 in / 231 mm

Fits
M6-10IB-C-GwGw-4: 10-inch
M6-10IB-S-GmTi-4: 10-inch
M6-10IB-S-GwGw-4: 10-inch
M6-10IB-C-GwGw-i-4: 10-inch
M6-10IB-S-GmTi-i-4: 10-inch
M6-10IB-S-GwGw-i-4: 10-inch

-Select your quantity
-Select your thickness (1/4,1/2,3/4)
-Select your edge profile (Straight, 1/8 Round, 1/4 Round)
-These are made with the best Starboard on the market King Plastics not that other cheap stuff
-These are made with the same type of machines as all the others you see out there
-We have been working with King Starboard for a very long time and we take pride in what we do

Don’t see a size you need?
Contact us and we would be more then happy to get you what you need, we make spacers for all brands and sizes.